Why pick one over the other?
Dell EMC PowerStore is a unified storage platform that has the added benefit of being scalable. The automated management of resources feature provides a more simple administration.
I found the flexibility, performance, and ease of use very helpful. We were looking for a solution that has good compression and we found it in PowerStore. Also, the load balancing is automated so you can cluster more appliances without worrying about the load balance.
It has a central interface, which makes it very user-friendly. The machine learning capabilities even give you recommendations to optimize administration, so for me, it is a winner.
That being said, there is a learning curve involved for setup, and the process is quite long. It would also be nice to have more enterprise features such as replication on other sites. For organizations using VMWare, it is difficult to integrate with PowerStore.
Dell EMC Unity XT is an All-Flash storage array solution that optimizes SSD performance. The goal of the solution is to streamline resource management from and to the cloud.
With this product, small businesses that cannot afford other enterprise flash storage offerings can have enterprise-level flash storage that is cost-effective. It makes it easy to manage storage and scale up by provisioning new workloads. I like it is easy to integrate with other products.
Still, Dell EMC Unity XT lacks some useful features like flexible raid volumes. It is also difficult to integrate it with enterprise backup solutions. We would like to use it, but the SNMP protocol is not supported. Tech support needs to improve their response time, too.
Overall, the Dell EMC PowerStore is a more complete solution if you are looking for automation and scalability. While the EMC Unity is easier to integrate, the PowerStore’s machine learning and central interface are better advantages.
I agree with Leah... There are a bit more features/options with PowerStore, but the networking setup much more complex (too much if you ask me).
Currently, there's no support for replicated NAS, so that's a big issue within our environment.
The scale-out feature is nice, but there's a lot of limitations, i.e. data isn't spread across all of the available 'appliances' in a big pool. Volumes are isolated to a single 'appliance' and can be migrated to another appliance if one becomes full or to balance the system out.
All in all, the product is still a bit too new and DELL needs some time to bake the product before I can fully endorse it.
For those reasons, we recently deployed Unity. It's much simpler to deploy & support (especially with NAS).
If you remove NAS from the equation, then it's fine for Tier2 workloads, but to be honest, PowerStore has a ways to go before it gets my vote.
@JohnBowling from 2.0 version NAS is serverd
Unity XT was released in April 2019, so it's about 2.5 years old at this point, and as you can imagine, mid-tier storage technology has changed significantly in the past 2.5 years.
PowerStore 2.0 supports end-to-end NVMe-FC protocol which is super-important if you're running an all-NVMe or all-SCM configuration on any array (not just Dell / EMC). Unity XT only supports legacy FC or iSCSI transport, both of which use legacy SCSI logic which was released back in the 1980's and was never intended for use with NVMe or SCM drives which use massive parallelism.
Also, there are no persistent NVMe or SCM drive options for Unity XT... only old-school 12Gb SAS SSDs and classic spinning disks.
Also, fiber transport speed on Unity XT is capped at 16Gb/s where PowerStore uses 32Gb/s currently.
PowerStore also has tons more compute and memory, which is necessary to run >1M IOPS. For example, the biggest Unity XT array (880) uses only 64 cores and 768GB of memory, where the biggest PowerStore (9000) uses 112 cores and 2560GB of memory.
Since the cost per TB is nearly identical between Unity XT and PowerStore, I believe the business cases to choose Unity XT over PowerStore are pretty limited at this point.
HPE Storage 3PAR solution on TOP
@Ali Ashraf can you please explain why?
How would you compare the All-Flash Storage Arrays products, such as Hitachi Virtual Storage Platform F, HPE Nimble Storage and Dell EMC Unity XT?
I'm researching flash storage arrays. I'm looking for advice about which of these two options is better - IBM flash 9200 or EMC VMAX8000.