When it comes to troubleshooting, in the past we had to take the console and do configuration changes, and we had to be on location or have a VPN connection to access it. But with Meraki, there is the advantage that you have dashboard access via the internet and you can work on it from anywhere. With Meraki switches, there is virtual stacking. Let's say you have two branches where two different switches are located. I can take a few ports from switch 1 and few ports from switch 2 and I can do a virtual stack between these ports. And there is a port schedule, as well. For example, some customers want to do make budget choices to save power or something. There is a port schedule option to give power for access points through these PoE ports on a schedule you choose, like during office hours. Morning 9:00 to evening 6:30, and it will work only Monday to Friday. I can schedule so these ports will be running those times only. In an annual scenario, this can mean more savings for the customer.
You can select multiple ports at a time in a checkbox, and you can do a port configuration. If uplinks are required, you can configure that, too. There are a couple of tools available in the Tools section where you can do ARP, Ping, LED status, etc. If any network goes down or is getting any warnings, you'll get an immediate amber symbol. We'll get alerts and an immediate email even if one link goes down or anything is wrong. We require some additional integrated tools for when a switch is down, like WhatsUp Gold, or SolarWinds. So on the back-end, we need to integrate our email servers into the process. We need more tools for that. But in the dashboard, it all comes together and gives greater visibility, including the UX pack if you want - everything will be there.
The features part is good. Everything in terms of access and everything else.