We just raised a $30M Series A: Read our story

Compare Dell EMC PowerMax NVMe vs. Dell EMC PowerStore

Cancel
You must select at least 2 products to compare!
Featured Review
Find out what your peers are saying about Dell EMC PowerMax NVMe vs. Dell EMC PowerStore and other solutions. Updated: November 2021.
555,358 professionals have used our research since 2012.
Quotes From Members

We asked business professionals to review the solutions they use. Here are some excerpts of what they said:

Pros
"There's lots of flexibility in how we use the resources while also maintaining a small footprint.""We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk solution. When new drives come out, we are able to take out half of the drives in the system, put in new drives, move our VMs over to the new drives, take the other drives out, and populate those with new drives. Then, we are suddenly twice as dense as we were before. NVMe flash is only going to get denser and cheaper so we can make use of that every couple of years by just throwing newer disks into it at a fraction of the cost of a new SAN.""The high performance is very valuable, as well as the enterprise reliability features."

More Pavilion HyperParallel Flash Array Pros »

"The optimization of the cache memory of each engine and the use of persistent memory.""You can use PowerMax for all workloads and consolidation. We have used it to scale thousands of VMs.""There is no management overhead involved in optimizing performance. It does it so well on its own. We don't have to manage much at all. It really is like a set it and forget it solution. My storage engineers love the system. It is a lot less work than our previous systems, which weren't bad by any means. There is not nearly as much management as before. So, we are saving dozens of hours per month for our storage team, and that is a real cost in our business.""The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion protection are also important because about 99 percent of our servers are production servers.""PowerMax NVMe has made it a lot easier to understand how much we are able to provision. It has made it a lot faster to provision new things. 90% of my time for provisioning has been reduced. Also, it has made it very easy to understand and see everything behind it versus the older heritage, where Dell EMC was very convoluted and hard to get working. Things that used to take an hour, probably now take five to 10 minutes.""Technical support has been excellent.""Based on our experience with VMAX, there isn't any hardware failure or something like that in PowerMax. Performance-wise also, everything is fine. We haven't faced any performance issues or any hardware failure. Its performance is great as compared to VMAX. Its I/O per second rate is higher than the old model.""The solution's snapshot capabilities and replication are very good features. Snapshots are allowing us to quickly build analytical models directly from production data. This gives us amazing insights into market trends and allows us to build more effective trading algorithms. Replication offers us unparalleled levels of resilience."

More Dell EMC PowerMax NVMe Pros »

"I like the performance of the PowerStore. When you talk about PowerStore, it's mainly about flash systems and high-end IOPS. The 1000T is a midsize box, in terms of the way the vendor positions it, but it is more than enough for our needs.""PowerStore is easy to use. All the drives use soft encryption. To upgrade it, you download the app, and it runs by itself. It's very easy to deploy, share, and create volumes.""The way you're able to manage all your PowerStores as one solution is very good for us. PowerStore enables you to federate or cluster multiple appliances with automated load balancing. In terms of management, it's helpful that we can do it from a single interface where we're able to manage multiple PowerStores. When you have multiple PowerStores it works intelligently by running the workloads based on the needs of the infrastructure.""Dell EMC PowerStore is scalable.""For access from virtual machines, iSCSI, and NFS, it is very good. It helps increase performance.""Gives us flexibility, performance, and ease of use. It also has some very good compression capabilities. We were looking for a solution that was easy to install in our VMware environment, that was flexible. PowerStore X is a type of a VMware cluster that you install inside your environment. If you have a VMware environment, like we have in production, it's easy to install and use.""The administration tools take advantage of machine learning and make recommendations to the admins, and that makes the administration easier."

More Dell EMC PowerStore Pros »

Cons
"I would like to see the management layer improved.""In our current configuration, we can only run the line controllers in high availability, active-standby mode, whereas we would like to see active-active implemented.""The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal rails, and they cover up the zero PDU slot. So, I don't like the rail system that comes with the device. That is my biggest complaint."

More Pavilion HyperParallel Flash Array Cons »

"The main feature that I personally want to see is the possibility to upgrade to the next generation without changing all the components and just change the engine, relying on the compatibility matrices between two different generations. Meaning that we could just keep the enclosure and upgrade the engine, integrating the enclosure to the existing pool, then adding automation tools for orchestration.""We brought up this question to the implementation engineer. We were comparing use cases where a customer is using RecoverPoint, then goes to PowerMax. In our previous setup with XtremIO, we were using RecpverPoint and keeping snapshots for 30 days, every few seconds. With PowerMax, I requested this for every 15 minutes, keeping it for a week. The engineer's answer was, "There will be too many snapshots. It might slow down the system." This is specifically for the use cases where there is RecoverPoint. While PowerMax works with RecoverPoint, and you can use it, there should be some way where you can have even more snapshots and not to worry about performance and system cache.""Support of the product can be slow and an administrative challenge: planning, scheduling, and overseeing data center access for a Dell EMC rep. One improvement could be to enable a self-maintenance option. The requirements that we go through to get Dell EMC onsite to replace failed drives, power supplies, and other small redundant parts can be unnecessarily complex. If simplified, they could send us the parts, then we could replace them much faster, more easily, and truly within the SLA parameters.""Firmware updates are a bit painful because you have to involve their support, as opposed to having the ability to do it yourself.""It's a relatively new product, but for the next release I would like to see higher bandwidth on the front-end adapters. This would allow even greater scalability for critical workloads and consolidation for non-critical workloads. The hosts may not require that level of I/O performance today. However, it allows us to scale physical non-cloud environments without large investment.""We have had some trouble with the VMAX-to-PowerMax migration, but the VMAX box will be powered down after the migration. The PowerMax boxes are working fine and we don't have any issues with them.""We would like more documentation, a guide to the features of the PowerMax.""If the solution had more power-saving capabilities, it would be quite nice."

More Dell EMC PowerMax NVMe Cons »

"During the installation phase, the licensing part was not straightforward. It was very difficult for the technicians, who are not trained Dell EMC technicians, to do the licensing because the information on their website is not straightforward... Eventually, I had to pass this task to our business partner and they did it for us.""The setup process could be improved. We had some issues regarding configuration and the time it took to do things. It wasn't specifically the people we worked with, but more the process and how it's done. They can work on that.""Where the system needs to improve is by adding more enterprise features like replication on other sites. We would also like it to be much more aligned with the VMware version. For example, today we have two different versions of VMware ESXi running to keep the PowerStore online. It would be better if the software cycling was faster.""The upgrades themselves are running fine, but after the upgrade is when we have a problem. With the update to 1.4, we had a head crash. They told us, 'This is a known issue. Please upgrade to 2.' We upgraded to 2 and, one week later they told us, 'Yeah, there are some issues in 2.0.0. You can lose data. Please upgrade to 2.0.1.' Overall, they need to make the system stable.""The price is on the higher side."

More Dell EMC PowerStore Cons »

Pricing and Cost Advice
"This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through them. For controllers, you pay for the components inside of the SAN, but there is only one chassis that they work with.""The licensing fees are very reasonable."

More Pavilion HyperParallel Flash Array Pricing and Cost Advice »

"One area for improvement, one that everybody always comes to, is price... it's still quite expensive to purchase these big arrays... For us, the pricing doesn't make Dell EMC uncompetitive.""We hope that with the combination of both NVMe and SCM the next PowerMax will be much cheaper that the one which we acquired.""Negotiate hard and consider the commercial advantages/benefits to Dell EMC for onboarding your product.""In terms of price-performance, it beat out other competitors when we were taking a look and comparing it to the market. That was one of the biggest driving points for us.""The labor savings and support have been significant. If we're talking 100 hours of labor every three months, that is 100 hours of a database engineer costs. There are performance latency numbers as well as costs associated with recovering data that gets lost, and this system doesn't lose data. You can look at numbers that go around the cost of downtime, if data is not available. This system doesn't go down. Everyone's ROI is going to be unique, but the dependability and performance of the system combined with its ease of operation will definitely save businesses of all sizes money."

More Dell EMC PowerMax NVMe Pricing and Cost Advice »

"When we compared it with the other solutions, the pricing of PowerStore was equal. The pricing is good.""There's still a cap on the upgrade path, where you can consume all the engines within the frame before you have to go to another frame... Normally, we exceed the IOPS on the frames before we can ever exhaust the storage, so anything they can do to help us avoid stranded storage capacity, capacity that we couldn't get to, would be beneficial.""The price is not cheap, but it's worth it for the features you get from the storage. If you can afford it, you are probably buying the best solution that you can have for this virtual environment.""We only have a single machine and we are currently using half of the hard disk slots. We have asked for an upgrade for the rest of the hard disks but, from my point of view, it costs too much. We have 12 to 15 hard disks inside and if we try to upgrade only the hard disks, it costs the same as the complete system. This is something I don't understand.""The price of Dell EMC PowerStore could be better, it is a bit expensive."

More Dell EMC PowerStore Pricing and Cost Advice »

report
Use our free recommendation engine to learn which All-Flash Storage Arrays solutions are best for your needs.
555,358 professionals have used our research since 2012.
Questions from the Community
Top Answer: We have been able to consolidate storage into Pavilion. Pavilions are our only SANs because it is a bring your own disk… more »
Top Answer: This is hardware. They have a singular array that you can populate with your own disk, or you can buy the disks through… more »
Top Answer: The rail system that Pavilion uses to mount up into a standard Dell or APC cabinet extends further back than normal… more »
Top Answer: Dell PowerStore is an all-solid-state midrange storage system. It has many internal elements taken from other Dell… more »
Top Answer: The performance is very good on our servers. It's superior. And the QoS capabilities for providing work congestion… more »
Top Answer: In terms of price-performance, it beat out other competitors when we were taking a look and comparing it to the market… more »
Top Answer: Dell EMC PowerStore is a unified storage platform that has the added benefit of being scalable. The automated management… more »
Top Answer: We compared PowerStore T 2.0 to Pure FlashArray and found them to be similar.  Pure FlashArray has offered NVMe-oF… more »
Top Answer: PowerStore is easy to use. All the drives use soft encryption. To upgrade it, you download the app, and it runs by… more »
Comparisons
Also Known As
Pavilion HFA
Dell EMC PowerMax, PowerMax
PowerStore
Learn More
Overview

Pavilion HyperParallel Data Platform

The Pavilion HyperParallel Data Platform™ dramatically accelerates what organizations achieve by delivering universally unmatched storage performance, in an incredibly compact solution while reducing data center costs and complexity. Unrivaled flexibility for multiple data types and protocols, along with broad ecosystem integration, ensure that every customer has choice and control.

What is the Pavilion HyperParallel Data Platform

The Pavilion HyperParallel Data Platform is comprised of the Pavilion HyperParallel Flash Array™ and Pavilion HyperOS™. The Pavilion HyperParallel Flash Array leverages a unique, switch-based architecture to create a multi-controller solution that delivers an unmatched combination of high performance, ultra-low latency, and storage density. Pavilion HyperOS is a powerful, purpose-built storage operating system designed to unlock the power of the multi-controller Pavilion HyperParallel Flash Array, which delivers scalability and flexibility that no other solution can offer.

Pavilion HyperParallel Data Platform Data Sheet

Download the Pavilion HyperParallel Data Platform data sheet. Updated: December 2020

Dell EMC PowerMax is the world’s fastest storage array. It delivers new levels of performance and efficiency with a future-proof architecture that features end-to-end non-volatile memory express (NVMe) and a built-in machine learning engine. PowerMax is built on the comprehensive functionality and proven resiliency of Dell EMC’s flagship storage platform. It is designed for six-nines of availability and offers data-at-rest encryption (D@RE), massive scalability, and best-in-class data protection with Symmetrix Remote Data Facility (SRDF), the gold standard in remote replication.

PowerStore 1000T through 9000T models provide organizations with all the benefits of a unified storage platform for block, file and vVol data, while enabling flexible growth with the intelligent scale-up and scale-out capability of appliance clusters. In addition, automated management of resources across the cluster results in superior storage utilization and simplified administration. Designed for the modern data center, PowerStore’s data-centric design with NVMe and hardware-enabled Advanced Data Reduction and 4:1 DRR deliver critical performance and storage efficiency for both traditional and modern applications.

Offer
Learn more about Pavilion HyperParallel Flash Array
Learn more about Dell EMC PowerMax NVMe
Learn more about Dell EMC PowerStore
Sample Customers
Texas Advanced Computing Center (TACC), Statistics Netherlands (CBS)
Rackspace, Open Line
Information Not Available
Top Industries
VISITORS READING REVIEWS
Computer Software Company29%
Comms Service Provider21%
Government7%
Manufacturing Company5%
REVIEWERS
Financial Services Firm26%
Healthcare Company19%
Retailer13%
Manufacturing Company10%
VISITORS READING REVIEWS
Computer Software Company33%
Comms Service Provider18%
Financial Services Firm8%
Government6%
VISITORS READING REVIEWS
Computer Software Company30%
Comms Service Provider23%
Financial Services Firm5%
Manufacturing Company5%
Company Size
VISITORS READING REVIEWS
Small Business71%
Midsize Enterprise3%
Large Enterprise26%
REVIEWERS
Small Business7%
Midsize Enterprise17%
Large Enterprise76%
REVIEWERS
Small Business33%
Midsize Enterprise11%
Large Enterprise56%
VISITORS READING REVIEWS
Small Business13%
Midsize Enterprise24%
Large Enterprise63%
Find out what your peers are saying about Dell EMC PowerMax NVMe vs. Dell EMC PowerStore and other solutions. Updated: November 2021.
555,358 professionals have used our research since 2012.

Dell EMC PowerMax NVMe is ranked 3rd in All-Flash Storage Arrays with 10 reviews while Dell EMC PowerStore is ranked 9th in All-Flash Storage Arrays with 7 reviews. Dell EMC PowerMax NVMe is rated 9.2, while Dell EMC PowerStore is rated 8.4. The top reviewer of Dell EMC PowerMax NVMe writes "CloudIQ ensures that all our arrays are properly communicating so we can see performance and storage capacities". On the other hand, the top reviewer of Dell EMC PowerStore writes "Enabled us to consolidate high-IOPS and lower tiers, but the licensing process is complicated". Dell EMC PowerMax NVMe is most compared with Dell EMC Unity XT, Pure Storage FlashArray, IBM FlashSystem, Hitachi Virtual Storage Platform F Series and Dell EMC XtremIO, whereas Dell EMC PowerStore is most compared with Dell EMC Unity XT, Pure Storage FlashArray, HPE Nimble Storage, HPE Primera and IBM FlashSystem. See our Dell EMC PowerMax NVMe vs. Dell EMC PowerStore report.

See our list of best All-Flash Storage Arrays vendors, best All-Flash Storage Arrays vendors, and best NVMe All-Flash Storage Arrays vendors.

We monitor all All-Flash Storage Arrays reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.